YouMobile on Facebook YouMobile on Google+ Follow YouMobile on Twitter
Tags - how

 

How To UNROOT Galaxy S3, Reset Flash Counter and Bring the Warranty back


WARNING :


  • Backup your data because all data on your device will be deleted
  • Use this AT YOUR OWN RISK !

Requirements :

  • Charged and Rooted Samsung galaxy S3
  • Installed "Triangle Away" App on SGS3 (Download from google play store)
  • Official firmware (Download from SamMobile.com)
  • Odin
  • Installed "Samsung Kies" or "Samsung Mobile driver" on PC


Steps :


- Backup your data ...


1- Download and install "Triangle Away" App from GP store http://tiny.cc/y68grw 

Or from XDA thread http://tiny.cc/ekahrw thanks to "Chainfire"


2- Open "Triangle Away" ... it will ask for download some data Hit "Download" and wait ... 

You should see this message like this "Please confirm your device is this exact model GT-I9300"


3- Hit continue


4- Hit "Reset flash counter" and "Continue"


Your device will restart into special mode


5- Volume up to continue


6- While rebooting ... Remove the battery and back it again


7- Start your device into "Download mode" (Volume Down + Home + Power)


8- Volume up to continue


- If you don't know how to flash FW by Odin ... you can watch it here :


www.youtube.com/watch?v=OqinDlH4hII


- After the flashing and configuration process finish


9- Unplug USB cable , Remove the battery and back it again


10- Start your device into "Recovery mode" (Volume UP + Home + Power)


11- Choose "Wipe data/factory reset" then "Yes" and wait ...


12- Choose "Wipe cache partition" then "Reboot system now"


Done !


Now check your "Device status" , It should be "Normal" :)


Downloads :


 

Updated :


16 Feb 2013 : Samsung Mobile Driver Ver-1.5.18.0


17 Feb 2013 : Samsung Kies Ver-2.5.2.13021_10

 

Notes :

  • Triangle Away may unmount your SD card , you can mount it from storage settings
  • New devices like SGS3/SGNote2/SGNote10.1, status can only be reset on some FW - they must be official firmwares !
  • This process works for various Samsung galaxy devices like (S3/2,Note1/2/10.1",Tab)
  • It does work on some (not all) stock firmwares. 
  • Resetting counter value doesn't work on custom firmwares
  • Some devices set the counter to 1 at every boot if you are running a custom kernel or recovery


On these devices, Triangle Away may always display 1, 
make sure to check the counter in actual download mode

 

All Credits goes to "MrW0000lf" on YouTube.



How To ROOT The Galaxy S 3 / S III [CF-Root]  


--- Backup your data first ---


Rooting Instructions :


1 - Download CF-Root-SGS3
2 - Unzip the file ONLY one time
3 - Open Odin
4 - Click on PDA button and browse to the CF-Root-SGS3-vX.X.tar file that you extracted
5 - Disconnect any device connected to USB ports on your computer
6 - Shut down your device
7 - Put your device into Download Mode (Volume Down + Home + Power)
8 - Volume up to continue
9 - Connect your device and wait until you get a sign in Odin (ID:COM section)
10 - Make sure re-partition is NOT CHECKED [Very important]
11 - Click "Start" and wait a few seconds.


* Do not disconnect the cable or turn off the device while rooting

 

Notes :


  • This stuff is made for the GT-I9300 and GT-I9300T
  • I am not responsible if something bad happened to your device (USE AT YOUR OWN RISK)
  • Please backup your important data before rooting
  • It will cancel your warranty
  • It will install : "Root: SuperSU","Recovery: ClockWorkMod","Util: CWM Manager"
  • Credits go to "Chainfire" (CF-Root developer)
  • XDA "CF-Root" thread http://goo.gl/asDw5


Downloads :




Updated :


16 Feb 2013 : Samsung Mobile Driver Ver-1.5.18.0
17 Feb 2013 : Samsung Kies Ver-2.5.2.13021_10

 



Step 1: Download Odin3 v3.04 from HERE


Step 2: Download Insecure/Original Kernels from HERE or Latest ICS Insecure/Original Kernels from HERE


Step 3: Goto Settings > Developer options and Enable USB Debugging on your device.


Step 4: Reboot your device into Download Mode. (With Device OFF, Hold Vol Down + Home + Power) If done correctly your device should have a big Yellow Triangle in the middle of the screen with the words 'Downloading... Do not turn off target' underneath. (Or Select 'Download Mode' then press 'Execute' in Samsung Quick Root).


Step 5 :Connect your device to your PC and start Odin. If you installed Samsung Kies correctly, you should see the box in the top left corner of Odin underneath where it says ID:COM should be Yellow and displaying the name of a Com Port your device is connected to.


Step 6: Check Odin's settings, Only the Auto Reboot and F. Reset Time checkboxes should be selected.


Step 7: Now press the PDA button and select the Insecure Kernel you downloaded earlier. (Note: This should be in *.tar, *.md5 or *.smd format.)


Step 8: Now press the Start button and wait for your device to reboot.


Step 9: If you have done everything correctly, you will notice a Yellow Triangle with an exclamation mark on the boot screen when the device is starting up. This indicates you are running an Insecure Kernel with Temp Root priviledges.


Step 10: When the device has finished booting, start Samsung Quick Root then press the Root Device button. Wait for the device to reboot depending on which Reboot option you selected then you are done Rooting.


Step 11: This is an OPTIONAL step but you can perform Steps 4 to 8 in this guide to flash the Original Kernel back to your device to remove the Yellow Triangle on the boot screen whilst still retaining Root Permissions.


Samsung_Quick_Root_1.8.3_Release.zip - (1.37 MB, 32611 views)


I am not responsible if something bad happened to your device (USE AT YOUR OWN RISK)


  • Please backup your important data before rooting
  • It will void your warranty

 

Easiest way to Root Samsung Galaxy Note 2:


1. Download ExynosAbuse-v1.40.apk  (1.16 MB)
2. place them in your note2
3. install ExynosAbuse-v1.40.apk
4. open app and press ''root device''
5. DONE


Watch the video below.




How To Install Ringtones


1. Download the ringtones


2. Unzip the zip file


3. Place ringtones into system>media>audio>


Download


Galaxy S4 Ringtones (Size: 11.8MB)



Sony is just spot on with their Prague promotion and attracted a big crowd with their campaign. Hot models displayed the Xperia Z, wet and speaking over the phone. In the shower. This marketing campaign draws quite the attention away from smartphones that are making bigger waves this week, such as the Galaxy S 4 or even the HTC One. We wonder how much the campaign actually draws the attention away from the Xperia Z. Men and women were seen taking their pictures beside the models, who acted nonchalantly wet with the Sony smartphone.


This campaign highlights the water resistance of the Xperia Z. This smartphone features a quad core processor running at 1.5 GHz each, Adreno 320 (GPU), 16GB internal with card slot that can support up to 32 GB extra memory, 2 GB RAM and it comes in Android Jelly Bean 4.1.2. Its best feature arguably is its being water resistant for 1 meter and for as long as 30 minutes (the reason for the shower promo probably).



Source: xperia.cz




How to Install Galaxy S Voice


Download S Voice's APK file from the download link here.


Copy the downloaded file to your device.


Go to Setting » Security menu on the device, make sure you Enable "Unknown sources". So that you can manually install apps from the SD card.

 

On Android 4.2, you'll have to first unhide the Developer options menu by going into Settings » About phone then clicking on the Build Number field seven times.


Download:


S-Voice APK (Size: 25.21MB)


Thanks to SamMobile

 



How To Install Wallpapers


1. Download the Wallpers (Link Below)


2. Unzip the zip files


3. Put wallpapers into the downloads folder


Download Link


Gallaxy S4′s Wallpapers (13.8MB)



 


Description

AndroidMaster
Posts: 1274





© 2018 YouMobile Inc. All rights reserved